The KUKA reducer RV-700CS is a precision reducer for industrial robots and automation equipment.
Model Explanation:
RV-700CS.
RV indicates that the reducer belongs to the harmonic or planetary series.
700 denotes the size of the reducer, usually related to input shaft diameter, mounting flange size, etc.
CS indicates the specific design type or version.
i=256,85.
i indicates the reduction ratio.
In this case, a reduction ratio of 256.85:1 means that the input shaft rotates 256.85 revolutions before the output shaft rotates one revolution. High reduction ratios are often used in applications where high torque and low speed are required.
a1 art 00-175-732.
A1 may indicate a specific configuration or option.
art 00-175-732 is an internal KUKA part number that uniquely identifies this type of gear unit.
Technical data (typical values, depending on the actual product):
Input speed: Maximum input speed is typically around 6000 rpm.
Output torque: Depending on the reduction ratio and input power, output torques of several hundred Nm can be achieved.
Efficiency: High precision gearboxes typically have efficiencies in excess of 90%.
Backlash: Reducers beyond the 250 series typically have very small backlash (<1 arc minute) for high precision applications.
Weight: Approximately 10-20 kilograms (depending on model).
Mounting: Various mounting options (horizontal, vertical, etc.) are supported.
Application Scenario:
Industrial robot joints: Especially robot joints that require high precision and high load capacity (e.g. shoulder, elbow or wrist).
Automation equipment: such as handling, welding, assembly and other high-precision motion control occasions.
CNC machines: Where high stability and repeatability are required.
Maintenance.
Regularly check the lubricant status to ensure good lubrication.
Avoid overloading to prevent damage to gears and bearings.